Location:Home > News

Note the use of a toggle switch

Publisher:Time:2015-6-30 22:06:35Views:
1 use of chemicals
Toggle switch board because of the use of synthetic resin such as polycarbonate, so should avoid potentiometer exposure to ammonia, amines, alkali solution, Su hydrocarbons, ketones, esters, halogenated hydrocarbon, etc. chemicals thick atmosphere.
2 with flux
Solder should avoid using water-soluble flux, otherwise it will constitute the toggle switch of metals and other materials produced adverse effects.
3 solder
Wiring design and soldering method should be avoided, resulting in the flow of molten tin to the PC board, which will cause contact with bad.
4 low temperature operation
When the product is used in a low-temperature environment, such as boreal car radio or car stereo, etc, the company according to customer requirements provide comfortable products, please when ordering is illustrated.
5 sliding handle length
Length of the shorter the better (at least 5mm) on the sliding handle width, a constant case, sliding handle length shorter, feel better, the other output higher, feel worse and worse.
6 driving arm
Do not make the operating point away from the center line of the slider, for the same reason, the shorter the distance between the two B.